Skylar One Juneau 12.5.2 Release Notification
We are pleased to announce that Skylar One Juneau 12.5.2 is now available on support portal: https://support.sciencelogic.com/s/release-file/aBtVL0000001IsX0AU/1252 Skylar One Juneau 12.5.2 includes new features and enhancements in the following product areas: Access Control Data Collection Deployment and Configuration Platform and Security Skylar AI Skylar One Juneau 12.5.2 addresses issues in the following product areas: Agent Authentication Data Collection and Retention Deployment and Configuration Device Management Discovery Event Management High Availability and Disaster Recovery Inbound Messaging Schedule Management Skylar AI System Upgrade User Interface If you are planning to consume Skylar One Juneau 12.5.2, be advised of the following: The 12.5.2 release is available only as a patch; there is no ISO version. All Python 2 functionality was removed from Skylar One with the 12.5.1 release. If you still use Python 2 for custom code, you cannot upgrade to this or any later releases until your custom code is Python 3-compatible. The validated upgrade paths to version 12.5.2 are outlined below. Be advised that you can perform upgrades from one minor version to any later minor version within the 12.5.x series. However, as with all updates, ScienceLogic strongly recommends that you perform such upgrades in a test environment before implementing the upgrades in production environments. 12.5.1 > 12.5.2 12.3.11 > 12.5.2 12.2.7 > 12.5.2 12.2.x and 12.3.x STIG-compliant users should contact their ScienceLogic account managers for information about upgrading to this release. AWS deployments that are using Aurora 3 can upgrade to this release. When upgrading Skylar One to version 12.5.2, PowerPacks will be temporarily read-only until the update is complete. The Enterprise Key Management Service (EKMS) is enabled by default in 12.5.2. For full details, see Skylar One Juneau 12.5.2 documentations: 12.5.2 Release Notes 12.5.2 Getting Started Guide 12.5.2 Product ChangesSkylar One Ibiza 12.3.9 Release Notification
We are pleased to announce that Ibiza 12.3.9 is now available. The release and documentation can be accessed using the following links: https://support.sciencelogic.com/s/release-file/aBtVL0000001CiH0AU/1239 Ibiza 12.3.9 includes new features and enhancements in the following product areas: EKMS Platform and Security Skylar AI Ibiza 12.3.9 addresses issues in the following product areas: Reporting Skylar AI System Upgrade For upgrade considerations and other details, please see Ibiza 12.3.9 Release Notes: https://docs.sciencelogic.com/release_notes/sciencelogic_12-3-9_release_notes.pdfSL1 Ibiza 12.3.8 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.8 is now available. The release and documentation can be accessed using the following links: https://support.sciencelogic.com/s/release-file/aBtVL00000018I50AI/1238 SL1 Ibiza 12.3.8 includes new features and enhancements in the following product areas: Deployment and Configuration Platform and Security Skylar AI SL1 Ibiza 12.3.8 addresses issues in the following product areas: Agent Data Collection and Retention Device Management Events Inbound Messaging Monitoring Policies REST API For upgrade considerations and other details, please see SL1 Ibiza 12.3.8 Release Notes https://docs.sciencelogic.com/release_notes/sciencelogic_12-3-8_release_notes.pdfSL1 Ibiza 12.3.6 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.6 is now available. The release and documentation can be accessed using the following links: https://support.sciencelogic.com/s/release-file/aBtVL00000011wX0AQ/1236 If you are planning to consume SL1 Ibiza 12.3.6, be advised of the following: The 12.3.6 release is available only as a patch; there is no ISO version. You can upgrade to this release directly from the following SL1 releases: 12.3.5 12.3.0 12.2.7 SL1 12.1.2, if all of your SL1 appliances have been converted to OL8 12.2.x and 12.3.x STIG-compliant users can upgrade to this release so long as they have not consumed or upgraded to the 12.3.0 STIG release. If you previously deployed or upgraded to 12.3.0 STIG, you cannot upgrade to 12.3.6 STIG due to a known technical issue. AWS deployments that are using Aurora 3 can upgrade to this release. If you are currently deployed using Aurora 2, you can upgrade to this release but you must perform a post-upgrade Aurora 2 to 3 conversion. SL1 12.3.6 is Department of Defense Information Network (DoDIN)-certified. NOTE: If you are on 12.1.2, you should upgrade directly to 12.3.6 without consuming the 12.2.x releases. WARNING: If you are upgrading from a version prior to 12.2.3, then after upgrading SL1, you must also upgrade MariaDB 10.4.x to version 10.6.18. Failure to perform this MariaDB upgrade can cause major functionality issues in SL1. IMPORTANT: You can consume SL1 12.3.6 only if you are upgrading from an earlier SL1 version that supports upgrades to this release. There is no ISO version for version 12.3.6. For more details, please see SL1 Ibiza 12.3.6 release notesSL1 Ibiza 12.3.5 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.5 is now available. It's a Non-STIG release at the moment. Support for STIG is being validated and will provide update soon. The release and documentation can be accessed using the following links: https://support.sciencelogic.com/s/release-file/aBtVL0000000z570AA/1235 If you are planning to consume SL1 Ibiza 12.3.5, be advised of the following: The 12.3.5 release is available only as a patch; there is no ISO version. You can upgrade to this release directly from the following releases: SL1 12.3.0 through 12.3.4 SL1 12.2.1.1 through 12.2.7 SL1 12.1.2, if all of your SL1 appliances have been converted to OL8 NOTE: If you are on 12.1.2, you should upgrade directly to 12.3.5 without consuming the 12.2.x releases. WARNING: If you are upgrading from a version prior to 12.2.3, then after upgrading SL1, you must also upgrade MariaDB 10.4.x to version 10.6.18. Failure to perform this MariaDB upgrade can cause major functionality issues in SL1. If you are on 12.1.0.2 or 12.1.1, you can upgrade to 12.1.2, convert to OL8, and then upgrade directly to 12.3.5 without consuming the 12.2.x releases. 12.2.x and 12.3.0 STIG-compliant users can upgrade to this release. If you are on an 11.x MUD system, you cannot upgrade directly to this release; you must first follow the approved conversion process from 11.x MUD to 12.2.1.1 STIG and then upgrade to 12.3.5 STIG. AWS deployments that are using Aurora 3 can upgrade to this release. If you are currently deployed using Aurora 2, you can upgrade to this release but you must perform a post-upgrade Aurora 2 to 3 conversion. SL1 12.3.5 is Department of Defense Information Network (DoDIN)-certified. For more details, see the SL1 Ibiza 12.3.5 release notes.SL1 Ibiza 12.3.4 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.4 is now available. The release and documentation can be accessed using the following links: https://support.sciencelogic.com/s/release-file/aBtVL0000000wgj0AA/1234 If you are planning to consume SL1 Ibiza 12.3.4, be advised of the following: The 12.3.4 release is available only as a patch; there is no ISO version. You can upgrade to this release directly from the following releases: SL1 12.3.0 through 12.3.3 SL1 12.2.1.1 through 12.2.6 SL1 12.1.2, if all of your SL1 appliances have been converted to OL8 NOTE: If you are on12.1.2, you should upgrade directly to 12.3.4 without consuming the 12.2.x releases. WARNING: If you are upgrading from a version prior to 12.2.3, then after upgrading SL1, you must also upgrade MariaDB 10.4.x to version 10.6.18. Failure to perform this MariaDB upgrade can cause major functionality issues in SL1. If you are on 12.1.0.2 or 12.1.1, you can upgrade to 12.1.2, convert to OL8, and then upgrade directly to 12.3.4 without consuming the 12.2.x releases. 12.2.x and 12.3.0 STIG-compliant users can upgrade to this release. If you are on an 11.x MUD system, you cannot upgrade directly to this release; you must first follow the approved conversion process from 11.x MUD to12.2.1.1 STIG and then upgrade to 12.3.4 STIG. For more information, see the section on STIG Support. AWS deployments that are using Aurora 3 can upgrade to this release. If you are currently deployed using Aurora 2, you can upgrade to this release but you must perform a post-upgrade Aurora 2 to 3 conversion. SL1 12.3.4 is Department of Defense Information Network (DoDIN)-certified. If you are planning to consume SL1 Ibiza 12.3.4, be advised of the following: The 12.3.4 release is available only as a patch; there is no ISO version. You can upgrade to this release directly from the following releases: SL1 12.3.0 through 12.3.3 SL1 12.2.1.1 through 12.2.6 SL1 12.1.2, if all of your SL1 appliances have been converted to OL8 NOTE: If you are on12.1.2, you should upgrade directly to 12.3.4 without consuming the 12.2.x releases. WARNING: If you are upgrading from a version prior to 12.2.3, then after upgrading SL1, you must also upgrade MariaDB 10.4.x to version 10.6.18. Failure to perform this MariaDB upgrade can cause major functionality issues in SL1. If you are on 12.1.0.2 or 12.1.1, you can upgrade to 12.1.2, convert to OL8, and then upgrade directly to 12.3.4 without consuming the 12.2.x releases. 12.2.x and 12.3.0 STIG-compliant users can upgrade to this release. If you are on an 11.x MUD system, you cannot upgrade directly to this release; you must first follow the approved conversion process from 11.x MUD to12.2.1.1 STIG and then upgrade to 12.3.4 STIG. For more information, see the section on STIG Support. AWS deployments that are using Aurora 3 can upgrade to this release. If you are currently deployed using Aurora 2, you can upgrade to this release but you must perform a post-upgrade Aurora 2 to 3 conversion. SL1 12.3.4 is Department of Defense Information Network (DoDIN)-certified. For more information, see SL1 Ibiza 12.3.4 release notes.SL1 Ibiza 12.3.3 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.3 is now available. The release and documentation can be accessed using the following links: https://support.sciencelogic.com/s/release-file/aBtVL0000000tED0AY/1233 If you are planning to consume SL1 Ibiza 12.3.3, be advised of the following: The 12.3.3 release is available only as a patch; there is no ISO version. You can upgrade to this release directly from the following releases: SL1 12.3.0 through 12.3.2 SL1 12.2.1.1 through 12.2.6 SL1 12.1.2, if all of your SL1 appliances have been converted to OL8 NOTE: If you are on12.1.2, you should upgrade directly to 12.3.3 without consuming the 12.2.x releases. If you are on 12.1.0.2 or 12.1.1, you can upgrade to 12.1.2, convert to OL8, and then upgrade directly to 12.3.3 without consuming the 12.2.x releases. 12.2.x and 12.3.0 STIG-compliant users can upgrade to this release. Users who are on an 11.x MUD system cannot upgrade directly to this release; they must first follow the approved conversion process from 11.x MUD to 12.2.1.1 STIG and then upgrade to 12.3.3 STIG. For more information, see the section on STIG Support in SL1 Ibiza 12.3.3 release notes. AWS deployments that are using Aurora 3 can upgrade to this release. If you are currently deployed using Aurora 2, you can upgrade to this release but you must perform a post-upgrade Aurora 2 to 3 conversion. SL1 12.3.3 is Department of Defense Information Network (DoDIN)-certified. For more information, see the SL1 Ibiza 12.3.3 release notesSL1 Ibiza 12.3.2 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.2 is now available. The release and documentation can be accessed using the following links: https://support.sciencelogic.com/s/release-file/aBtVL0000000pnJ0AQ/1232 If you are planning to consume SL1 Ibiza 12.3.2, be advised of the following: The 12.3.2 release is available only as a patch; there is no ISO version. You can upgrade to this release directly from the following releases: SL1 12.3.0 or 12.3.1 SL1 12.2.1.1 through 12.2.6 SL1 12.1.2, if all of your SL1 appliances have been converted to OL8. If you are on12.1.2, you should upgrade directly to 12.3.2 without consuming the 12.2.x releases. If you are on 12.1.0.2 or 12.1.1, you can upgrade to 12.1.2, convert to OL8, and then upgrade directly to 12.3.2 without consuming the 12.2.x releases. 12.2.x and 12.3.0 STIG-compliant users can upgrade to this release. Users who are on an 11.x MUD system cannot upgrade directly to this release; they must first follow the approved conversion process from 11.x MUD to 12.2.1.1 STIG and then upgrade to 12.3.2 STIG. For more information, see the section on STIG Support. AWS deployments that are using Aurora 3 can upgrade to this release. If you are currently deployed using Aurora 2, you can upgrade to this release but you must perform a post-upgrade Aurora 2 to 3 conversion. SL1 12.3.2 is Department of Defense Information Network (DoDIN)-certified. For more information, see the SL1 Ibiza 12.3.2 release notes.SL1 Ibiza 12.3.1 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.1 is now available. The release and documentation can be accessed using the following links: .iso: https://support.sciencelogic.com/s/release-file/aBtVL0000000n7B0AQ/1231 .siloupdate: https://support.sciencelogic.com/s/release-file/aBtVL0000000n8n0AA/1231 If you are planning to upgrade to SL1 Ibiza 12.3.1, be advised of the following: You can upgrade to this release directly from SL1 12.2.1.1, 12.2.1.2, 12.2.3, 12.2.4.1, 12.2.5, 12.2.6, and 12.3.0. You can also upgrade directly from SL1 12.1.2 if all of your SL1 appliances have been converted to OL8. If you are already on 12.1.2, you should upgrade directly to 12.3.1 without consuming the 12.2.x releases. If you are on 12.1.0.2 or 12.1.1, you should upgrade to 12.1.2, convert to OL8, and then upgrade directly to 12.3.1. STIG-compliant users can deploy this release; 12.2.x and 12.3.0 STIG-compliant users can upgrade to this release. Users who are on an 11.x MUD system cannot upgrade to this release; they must first follow the approved conversion process from 11.x MUD to 12.2.1.1 STIG. For more information, see the section on STIG Support. AWS deployments that are using Aurora 3 can upgrade to this release. If you are currently deployed using Aurora 2, you can upgrade to this release but must perform a post-upgrade Aurora 2 to 3 conversion. SL1 12.3.1 is Department of Defense Information Network (DoDIN)-certified. For more information, see the Sl1 Ibiza 12.3.1 release notes: https://docs.sciencelogic.com/release_notes/sciencelogic_12-3-1_release_notes.pdfSL1 Hollywood 12.2.6 Release Notification
We are pleased to announce that SL1 Hollywood 12.2.6 is now available. The release and documentation can be accessed using the following link: https://support.sciencelogic.com/s/release-file/aBtVL0000000jzd0AA/1226 If you are planning to consume SL1 Hollywood 12.2.6, be advised of the following: The 12.2.6 release is available only as a patch; there is no ISO version. SaaS deployments cannot upgrade to 12.2.6; this release is limited to on-premises deployments only. You can upgrade to 12.2.6 directly from the following SL1 versions: 12.2.1.1 12.2.1.2 12.2.3 12.2.4.1 12.2.5 On-premises STIG-compliant users can upgrade to 12.2.6. You must currently be on a version of SL1 with all appliances running on Oracle Linux 8 (OL8) before you can upgrade to 12.2.6. Users who currently use Python 3.9 execution environments for Dynamic Applications and Run Book Automations should not upgrade to 12.2.6. Due to a known issue, Python 3.9 is not supported in this release. You cannot upgrade to SL1 12.2.6 in the following scenarios: You are on a SaaS deployment of SL1. You have not yet deployed or upgraded to an SL1 version in which all appliances are running on Oracle Linux 8 (OL8). For full details, please see the SL1 Hollywood 12.2.6 release notes: https://docs.sciencelogic.com/release_notes/sciencelogic_12-2-6_release_notes.pdf
