Forum Discussion

SunnyPawar1989's avatar
SunnyPawar1989
Icon for Participant rankParticipant
31 days ago

To monitor NFS volume usage

Hi  Can we monitor NFS file/volume usage in SL1, if so which powerpack we can use. Kindly suggest. Regards,
  • TonyAndres's avatar
    TonyAndres
    16 days ago

    Hello Sunny,

    Assuming you are leveraging the Data Collection: Host Filesystem Inventory process, which is our internal filesystem collection process, you can navigate to the System > Settings > Behavior page and uncheck the option NFS Detection Disable. This will allow the NFS drives to be discovered by SL1. 

    If you are using a specific, non-ICDA dynamic app to discover the filesystems, then we will need to know which dynamic app you are using to see if NFS drives can be discovered and monitored via that specific PowerPack.

    Antonio Andres

    Senior Technical Support Engineer | ScienceLogic

TonyAndres's avatar
TonyAndres
Icon for Moderator rankModerator
16 days ago

Hello Sunny,

Assuming you are leveraging the Data Collection: Host Filesystem Inventory process, which is our internal filesystem collection process, you can navigate to the System > Settings > Behavior page and uncheck the option NFS Detection Disable. This will allow the NFS drives to be discovered by SL1. 

If you are using a specific, non-ICDA dynamic app to discover the filesystems, then we will need to know which dynamic app you are using to see if NFS drives can be discovered and monitored via that specific PowerPack.

Antonio Andres

Senior Technical Support Engineer | ScienceLogic