sciencelogic platform

14 Topics

Missed polls for custom DA
Hi All, We have some custom SNMP DA where we are seeing missed polls , the same SNMP oid is working fine with OOB DA without missed polls. There is no network issue. Anyone facing this issue ?
Issac
2 months ago Place ScienceLogic SL1
30Views
2likes
1Comment
Which Dynamic App is more efficient for Linux File System exceeds a threshold
Which Dynamic Application is more efficient for File System Utilization SL1 can trigger two different type of events for when a File System exceeds a threshold: File System exceeded events are generated via an Internal DA by SL1 and is executed every 5 minutes Host Resource Storage Utilization events are generated via a Discovered DA from the SNMP agent on the host and can be collected at 5, 10, or 15-minute interval I am trying to determine which one make more sense to use on linux servers and is not as taxing the data collectors.
Solved
ShawnRobertsGD
3 months ago Place ScienceLogic SL1
36Views
0likes
1Comment
Is anyone else running SL1 v12.1.2?
We were supposed to be upgraded to v12.2 but problems with Aurora (the AWS database offering) we have ben placed onto v12.1.2. We were handed the system on September the 9th, and the release notes are dated the 10th. It has zero backward compatibility with collectors (all must be on 12.1.2) and we've been plagued with critical system alerts before we even attached a collector. I kind of get the feeling that we're alpha testing this release.... ☹️ Can anyone else, give me some comfort and confirm that we are not the Guinea Pigs for this release?
yaquaholic
3 months ago Place ScienceLogic SL1
160Views
1like
6Comments
SL1 Themes after upgrading to v12.2.1.2
Upgraded to SL1 v12.2.1.2 last night and had some bumps but for most part my organization is doing okay. Seen several positive changes in the UI like a much improved Events page however I'm having problems with my themes. I have both a lab and a production systems. To keep myself from accidentally doing stuff in production when I think I'm in the lab, in the past I put a dark theme on production and a light theme on my lab. Since the upgrade I'm seeing light theme pages in certain pages, despite the fact that the dark theme is applied (and reapplied for good measure). Is this a known issue? Anyone else seeing this behavior?
Solved
mattwestjames
3 months ago Place ScienceLogic SL1
37Views
1like
2Comments
Overlapping IP addresses
This might be an oldie... How should we manage devices which have multiple overlapping IP addresses. For example Layer3 switches or router HA pairs can have same IP addresses set up to two or multiple devices for routing high availability or management reasons. This then makes SL1 see same IP addresses in multiple devices. And that then generates events into System organization, events like: A Message Collector is managing multiple devices with an overlapping secondary IP address: Secondary IP address overlap on devices managed by Message Collector: 101 | Collector Groups: 44 | IP Address: 128.0.0.127 | Device IDs: 70999, 70998, 71001, 71009, 71005, 71003, 71006, 71004, 71007, 71002, 71013, 71012, 71015, 71010, 71014, 71008, 71016 Ok, that IP address can be deleted from database, but the nightly discovery again brings up the same issue next day. And because those are network devices where every now and then are some changes done in interfaces I believe we just have to have the Auto-Update enabled for those devices. So: is there a way to tell that please do not discover all IP addresses for this device is there a way to make SL1 accept that, some other way than creating pretty interesting regexes into event policies event policy is for system level so that not easily be just suppressed for some devices are there some other ideas how to manage this situation
Solved
teppotahkapaa
3 months ago Place ScienceLogic SL1
53Views
2likes
2Comments
Need a help on Low ode Information
Hi Everyone I am currently trying to gather information about low-code in ScienceLogic, including how it works, what updates and changes have been made, how it can be implemented, and how we can effectively use it. If anyone can provide related documents or resources, it would be very helpful for me
Uday173
3 months ago Place ScienceLogic SL1
40Views
0likes
1Comment
How Do I Set The Parent Device Of A Device?
Hello, I hope someone can assist with the following. I am using Device Component Mapping to create a hierarchical/tree structure of devices, but SL seems to assign the Parent Device attribute randomly for each device created, and I need to be able to set the Parent Device correctly, so that the hierarchical structure is correct. I have data that contain a set of locations that correspond to the tree structure. The structure has this concept: One Country -> Many Cities -> Many Buildings -> Many Rooms. Each data record has an id, a name, a parent id and a type. The data is split into cities, buildings and rooms. For example, a city record might be as follows: id: CITYPARIS, name: Paris, parent id: CTRYFRANCE, type: city. A building record might be as follows: id: BLDGMONTPARNASSE, name: Tour Montparnasse, parent id: CITYPARIS, type: building. And to complete the picture, a room record might be as follows: id: ROOMMEETING1, name: Meeting Room 1, parent id: BLDGMONTPARNASSE, type: room. When I create one of the 'tree' levels of devices (it could be city, or building, or room), in my Dynamic Application, the code snippet extracts cached data where the type is 'city', then passes the extracted data to the result handler, which populates the four collection fields: id, name, parent_id, type. The id field is set to be the Unique Identifier, the name field is set to be the Device Name, and the type field is set to be Class Identifier 1 (I've created device classes for each tree level, allows me to have funky icons to distinguish the devices visually). The DA then creates devices for each record found, and I see them appearing on the Device Manager screen. However, when I examine each device, the Parent Device that is set seems to be random. For example, three city devices created (Paris, Nantes, Poitiers) all were assigned a Parent Device of 'Paris', the name of one of the devices created, instead of using their own parent_id values. Is there a way to tell SL what the Parent Device for each device record should be, perhaps in the snippet or somewhere else? Can I use one of the field values extracted from the cached data (ideally, my parent_id) as the value for the Parent Device field? This is my first post here, so apologies if this is in the wrong place!
Solved
TADAndyMarshall
4 months ago Place ScienceLogic SL1
183Views
1like
14Comments
Group rules for Interface
Hi All, There is any plans from to implement the grouping for interfaces .i:e I need to group the interface where the alias name contains or starts with MSP . Basically this will help for reporting , dashboarding and applying template only to specific set of interfaces.
Solved
Issac
5 months ago Place ScienceLogic SL1
51Views
2likes
2Comments
Orchestration Tasks in Sl1
Hi All, I would like do some orchestration task from Sl1. Eg: I have a webserver A where if the File system reaches above 95% we used to get an alert from SL . With the help of RBA i need to trigger a task saying that if the alert is trigger from websever A , just shutdown the server Apache. There is any OOB method to do this ? Or we need to write the script to trigger ?
Solved
Issac
5 months ago Place ScienceLogic SL1
100Views
0likes
4Comments
Who will be our next SL1 Innovators?
Hello Nexus Members, Looking to showcase your creativity, innovation, and inspiration? Look no further. In case you're opted out of email, we just launched our SL Innovators Awards!! Our ScienceLogic Innovators Awards were established to recognize and learn from those nerdy by nature, tech buffs, and visionaries using SL1 in pioneering ways to power a better way to work. Show the Nexus Community something cool and innovative you've been working on to achieve real business outcomes. We want to hear your ideas! Submit your applicationby September 12.
kyraecker
6 months ago Place ScienceLogic SL1
38Views
0likes
0Comments