Group Content
Recent Content
Skylar Compliance RPM Agent 5.6 20260123 Hotfix is Released
Hello, We are pleased to announce the release of a hotfix for the Skylar Compliance RPM Agent. Release 5.6 20260123 addresses the following issue: Addressed an issue where multiple firmware upgrades using the same agent caused the file to be transferred to the agent multiple times. This could lead to situations where the file system of the agent would get full if multiple devices were being upgraded in that agent, or could cause firmware upgrades on multiple devices to take longer than they should. (Case: 00607264) Thank you, Release ManagementSkylar One Juneau 12.5.3 Release Notification
We are pleased to announce that Skylar One Juneau 12.5.3 is now available on support portal: https://support.sciencelogic.com/s/release-file/aBtVL0000001Lbt0AE/1253 Skylar One Juneau 12.5.3 includes new features and enhancements in the following product areas: Agent Platform and Security Topology Skylar One Juneau 12.5.3 addresses issues in the following product areas: Agent Dashboards Data Collection and Retention Device Management Event Management Monitoring Policies Run Book Automations Skylar AI System Upgrade Topology User Interface If you are planning to consume Skylar One Juneau 12.5.3, be advised of the following: The 12.5.3 release is available only as a patch; there is no ISO version. All Python 2 functionality was removed from Skylar One with the 12.5.1 release. If you still use Python 2 for custom code, you cannot upgrade to this or any later releases until your custom code is Python 3-compatible. The validated upgrade paths to version 12.5.3 are outlined below. Be advised that you can perform upgrades from one minor version to any later minor version within the 12.5.x series. However, as with all updates, ScienceLogic strongly recommends that you perform such upgrades in a test environment before implementing the upgrades in production environments. 12.5.2 > 12.5.3 12.5.1 > 12.5.3 12.3.12 > 12.5.3 12.3.11 > 12.5.3 12.2.7 > 12.5.3 12.2.x and 12.3.x STIG-compliant users should contact their ScienceLogic account managers for information about upgrading to this release. AWS deployments that are using Aurora 3 can upgrade to this release. When upgrading Skylar One to version 12.5.3, PowerPacks will be temporarily read-only until the update is complete. The Enterprise Key Management Service (EKMS) is enabled by default in 12.5.3. For full details, see Skylar One Juneau 12.5.3 documentations: 12.5.3 Release Notes 12.5.3 Getting Started Guide 12.5.3 Product ChangesSkylar Compliance 5.6 20260114 Release
Hello, We are pleased to announce the release of Skylar Compliance 5.6 20260114 for appliances. The following updates are available in this release: Added the new Update URLs button to the SAML tab of the "Auth Servers" page, which allows you to update the ACS URL and Entity ID fields based on your current web browser's address bar. (Case: 00577946) Addressed an issue that prevented successful display and deletion of backups due to an error when scanning the "contextconfigtypes" database column. (Case: 00603378) Addressed an issue that caused reports with multiple filters to filter data incorrectly and return empty reports as a result. (Case: 00596935) Addressed an issue that prevented an Until date from being selected when configuring the Disabled option on the Device Details tab of a device. This issue occurred when the timezone of your web browser was set to any option west of Coordinated Universal Time (UTC). (Case: 00589626) Addressed an issue that prevented command timeouts from being applied correctly when running commands as part of a backup. (Case: 00560244) Addressed an issue with the Skylar Compliance API that prevented the "DisableStrictHostKeyChecking": true flag from functioning correctly when making an API request to create a device. (Case: 00595624) The "DisabledReason" will now be displayed properly when pulling a list of all devices. (Case: 00595624) Thank you, Release ManagementNvidia GPU Monitoring v101 PowerPack Release Notification
We are pleased to announce that the Nvidia GPU Monitoring v101 PowerPack has been released. The download for this release can be found on the Support Portal under the PowerPack filename: https://support.sciencelogic.com/s/release-version/aBuVL0000000V2D0AU/nvidia-gpu-monitoring Issues Addressed in this Release The following issues were addressed in this release: Added support for single-GPU configurations to all Dynamic Applications in the PowerPack. (Case: 00543044) Updated the indexing method for all Dynamic Applications in the PowerPack to handle cases where serial numbers might be absent. In cases where the serial number is absent, the universally unique identifier (UUID) is now used for indexing. Please refer to the Nvidia GPU Monitoring v101 PowerPack File Details in the PowerPacks section of the Support Portal for all information pertaining to the Nvidia GPU Monitoring v101 PowerPack Support Status, Minimum SL1 Version, Solution Information, and Pricing Information. The Nvidia GPU Monitoring v101 PowerPack Release File Details also contains links to the Release Notes, Manual, and PowerPack Info Report. Issues Addressed in the Nvidia GPU Monitoring v101 PowerPack Release can be found in the Release Notes.SL1 Ibiza 12.3.12 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.12 is now available at: https://support.sciencelogic.com/s/release-file/aBtVL0000001Kfp0AE/12312 SL1 Ibiza 12.3.12 includes new features and enhancements in the following product areas: Agent Authentication Platform and Security System Upgrades SL1 Ibiza 12.3.12 addresses issues in the following product areas: Dashboards Data Collection Device Management Events Inbound Messaging Monitoring Policies System Upgrades The following are the validated upgrade paths: 12.3.11 > 12.3.12 12.3.0 > 12.3.12 12.2.7 > 12.3.12 12.2.1.1 STIG > 12.3.12 STIG 12.1.2 (OL8) > 12.3.12 Be advised that you can perform upgrades from one minor version to any later minor version within the 12.3.x series. However, as with all updates, ScienceLogic strongly recommends that you perform such upgrades in a test environment before implementing the upgrades in production environments. WARNING: If you are upgrading from a version prior to 12.2.3, then after upgrading SL1, you must also upgrade MariaDB 10.4.x to version 10.6.18. Failure to perform this MariaDB upgrade can cause major functionality issues in SL1. For full details, see the SL1 Ibiza 12.3.12 release notesLinux Base Pack v114 PowerPack Release Notification
We are pleased to announce that the Linux Base Pack v114 PowerPack has been released. The download for this release can be found on the Support Portal under the PowerPack filename: https://support.sciencelogic.com/s/release-version/aBu0z000000XZHFCA4/linux-base-pack Enhancements and Issues Addressed The following enhancements and addressed issues are included in this release: Updated all Dynamic Applications to use the Snippet Framework. NOTE: Due to this change, the "Linux: Configuration Discovery" and "Linux: SSH Cache Worker" Dynamic Applications are no longer required and should remain disabled in version 114 of the "Linux Base Pack" PowerPack. Added three new collection objects to the "Linux: Memory Performance" Dynamic Application: "Out of Memory Kill Count", which indicates the number of processes the kernel has terminated due to running out of memory since booting. "Swap In", which shows how often data is moved from disk back into system memory, measured in pages per second. "Swap Out", which shows how often data is moved from system memory to storage, measured in pages per second. Resolved an issue that caused missed CPU performance polls by disabling the "Linux: SSH Cache Worker" Dynamic Application, which is no longer required for using this PowerPack. (Case: 00521297) (Jira ID: SOL-31307) Please refer to the Linux Base Pack v114 PowerPack File Details in the PowerPacks section of the Support Portal for all information pertaining to the Linux Base Pack v114 PowerPack Support Status, Minimum SL1 Version, Solution Information, and Pricing Information. The Linux Base Pack v114 PowerPack Release File Details also contains links to the Release Notes, Manual, and PowerPack Info Report. Issues Addressed in the Linux Base Pack v114 PowerPack Release can be found in the Release Notes.Skylar Compliance RPM Agent 5.6 20251231 Release
Hello, We are pleased to announce the release of the Skylar Compliance RPM Agent 5.6 20251231. This release includes the following update: Set the default temporary directory used by some packages to the one defined by Skylar Compliance. This change only affects agents. Thank you, Release ManagementSkylar Compliance 5.6 20251231 Release
Hello, We are pleased to announce that Skylar Compliance 5.6 20251231 was released for appliances on December 31, 2025. The following updates were included: Addressed an issue that prevented correct response from the Skylar Compliance API when using the "LastSuccessfulBackup" and "LastSuccessfulBackupID" field filters. (Case: 00593869) Set the default temporary directory used by some packages to the one defined by Skylar Compliance. This change only affects agents. Thank you, Release ManagementMicrosoft: Active Directory Server v102 PowerPack Release Notification
We are pleased to announce that the Microsoft: Active Directory Server v102 PowerPack has been released. The download for this release can be found on the Support Portal under the PowerPack filename: https://support.sciencelogic.com/s/release-version/aBu0z000000XZKJCA4/microsoft-active-directory-server Enhancements and Issues Addressed The following enhancements and addressed issues are included in this release: Updated the PowerPack to support Microsoft Active Directory 2022. Added the "Microsoft: Active Directory Additional Information" Dynamic Application, which uses PowerShell to collect and report essential Active Directory configuration and health metrics such as replication status and failures, Group Policy error events, domain trust status, time synchronization state, and core domain controller services. Added the "Microsoft: Active Directory Monitoring Enhancement" Dynamic Application, which introduces new collection objects to expand performance visibility for Microsoft Active Directory. This Dynamic Application also adds PowerShell-based monitoring for key Active Directory internals, including network client load, database capacity metrics, and CPU and Handle count performance indicators for Distributed File System Replication (DFSR) and Local Security Authority Subsystem Service (LSASS). Added the "Microsoft: Active Directory Account Lockout Alert" Dynamic Application, which monitors Active Directory account lockout events (Event ID 4740) on domain controllers. The Dynamic Application collects details such as the locked-out username, lockout time, and event message, and generates an alert whenever a valid lockout event is detected. Please refer to the Microsoft: Active Directory Server v102 PowerPack File Details in the PowerPacks section of the Support Portal for all information pertaining to the Microsoft: Active Directory Server v102 PowerPack Support Status, Minimum SL1 Version, Solution Information, and Pricing Information. The Microsoft: Active Directory Server v102 PowerPack Release File Details also contains links to the Release Notes, Manual, and PowerPack Info Report. Issues Addressed in the Microsoft: Active Directory Server v102 PowerPack Release can be found in the Release Notes.Skylar One Juneau 12.5.2 Release Notification
We are pleased to announce that Skylar One Juneau 12.5.2 is now available on support portal: https://support.sciencelogic.com/s/release-file/aBtVL0000001IsX0AU/1252 Skylar One Juneau 12.5.2 includes new features and enhancements in the following product areas: Access Control Data Collection Deployment and Configuration Platform and Security Skylar AI Skylar One Juneau 12.5.2 addresses issues in the following product areas: Agent Authentication Data Collection and Retention Deployment and Configuration Device Management Discovery Event Management High Availability and Disaster Recovery Inbound Messaging Schedule Management Skylar AI System Upgrade User Interface If you are planning to consume Skylar One Juneau 12.5.2, be advised of the following: The 12.5.2 release is available only as a patch; there is no ISO version. All Python 2 functionality was removed from Skylar One with the 12.5.1 release. If you still use Python 2 for custom code, you cannot upgrade to this or any later releases until your custom code is Python 3-compatible. The validated upgrade paths to version 12.5.2 are outlined below. Be advised that you can perform upgrades from one minor version to any later minor version within the 12.5.x series. However, as with all updates, ScienceLogic strongly recommends that you perform such upgrades in a test environment before implementing the upgrades in production environments. 12.5.1 > 12.5.2 12.3.11 > 12.5.2 12.2.7 > 12.5.2 12.2.x and 12.3.x STIG-compliant users should contact their ScienceLogic account managers for information about upgrading to this release. AWS deployments that are using Aurora 3 can upgrade to this release. When upgrading Skylar One to version 12.5.2, PowerPacks will be temporarily read-only until the update is complete. The Enterprise Key Management Service (EKMS) is enabled by default in 12.5.2. For full details, see Skylar One Juneau 12.5.2 documentations: 12.5.2 Release Notes 12.5.2 Getting Started Guide 12.5.2 Product ChangesScienceLogic: Skylar Automation Monitoring PowerPack v108
Hello, We are pleased to announce the release of ScienceLogic: Skylar Automation Monitoring PowerPack v108. The "ScienceLogic: Skylar Automation" PowerPack version 108 rebrands the PowerPack from "ScienceLogic: PowerFlow" to "ScienceLogic: Skylar Automation and addresses an issue with the "ScienceLogic: Skylar Automation Healthcheck" Dynamic Application. Minimum Required Skylar One Version: 12.3.0 The following enhancements and addressed issues are included in this release: PowerFlow is now Skylar Automation. With this release, ScienceLogic has rebranded the "ScienceLogic: PowerFlow" PowerPack to the "ScienceLogic: Skylar Automation" PowerPack. You will notice this rebranding throughout the PowerPack. This change, as well as similar branding changes to the other products offered by ScienceLogic, reflects ScienceLogic's commitment to delivering intelligence that accelerates outcomes through service-centric observability, AI-driven operations, and intelligent automation. For more information, see the ScienceLogic website (https://sciencelogic.com/platform/overview). Updated the SSH collection snippet of the "ScienceLogic: Skylar Automation Healthcheck" Dynamic Application to improve result handling. Placeholder text was replaced with clearer messaging when fields are missing: o If there is missing information, "No Info" will display. If there is a missing error, "No Error" will display. You may download the ScienceLogic: Skylar Automation Monitoring PowerPack v108 from the Support Center. Thank you, Release ManagementSkylar Compliance 5.6 20251217 Release
Hello, We are pleased to announce the release of Skylar Compliance 5.6 20251217 for appliances. This release contains the following updates: Updated the name of the Timeout field on the Device Control page to Wait Duration. Additionally, a tooltip was added to explain how to use the Wait Duration field. Updated the SSH Keys section heading to SSH under the Security tab of the System Settings page (Administration > System Settings > Security). Added a Clear button at the top of the SSH section under the Security tab of the System Settings page, which deletes all SSH keys from all previously known devices when clicked. Added a copy icon to the Register Key and Offline Register URL fields on the "Upload Registration File" and "Manual Upgrade" modals to make it easier to copy the values in those fields. Addressed an issue with the user interface that caused the backup retries value to display incorrectly when set to zero. (Case: 00584659) Addressed an issue that caused some users to be redirected to "var/restorepoint/ui" after authenticating with Security Assertion Markup Language (SAML). Increased file descriptor limits to prevent a "too many open files" error from triggering when launching Skylar Compliance. (Case: 00587104) Thank you, Release ManagementMicrosoft Teams v2.0.1 SyncPack is Released
Hello, We are pleased to announce the release of Microsoft Teams v2.0.1 SyncPack. The following issue was addressed in this release: Addressed an issue that prevented configuration objects from being visible after installing the SyncPack. (Case: 00559847) Thank you, Release ManagementSkylar Compliance v3.0.0 SyncPack and Skylar Compliance v107 PowerPack are released
Hello, We are pleased to announce the release of the Skylar Compliance (formerly Restorepoint) v3.0.0 SyncPack and the associated Skylar Compliance v107 PowerPack. These releases contain many important updates, detailed here and in the Release Notes. With this release, ScienceLogic has rebranded the "Restorepoint" SyncPack to the "Skylar Compliance" SyncPack. You will notice this rebranding throughout the SyncPack, along with the Skylar Automation (formerly PowerFlow) platform. This change, as well as similar branding changes to the other products offered by ScienceLogic, reflects ScienceLogic's commitment to delivering intelligence that accelerates outcomes through service-centric observability, AI-driven operations, and intelligent automation. For more information, see the ScienceLogic website (https://sciencelogic.com/platform/overview) Features Included Updated the "CreateSkylarComplianceDevice" step to improve device creation and onboarding in the following ways: Updated plug-in retrieval to ensure the latest plug-in data is fetched, which will improve configuration of device backup protocols. Updated logic when preparing credentials to prevent duplicate creation of credentials. If a Skylar Compliance Device ID already exists for a device, it will not be created as a duplicate, and the Skylar One custom attribute will be updated." Updated the "Get Plugin Details" step to use real-time plug-in data. This ensures that whenever you update a device's configuration and/or protocols, you can log in to Skylar Compliance and adjust the default configuration of the plug-in. Subsequently, when a new device is registered, the real-time plug-in default configuration will be fetched, along with the protocol, enabling the creation of a new device using these updated details. Combined three of the steps in the "Skylar Compliance: Sync Devices" application into the "Retrieve Device Group Data from Skylar One" step to improve the efficiency of the process when retrieving devices under the "Skylar Compliance Devices" group and fetching the device limit from Skylar Compliance. Combined multiple steps of the "Skylar Compliance: Sync Devices" application into the "CreateandValidateCustomAttribute" step to allow a custom attribute to be created for a device if one does not exist. Additionally, added logging if a custom attribute already exists for a device. Added the "Skylar Compliance: Pre Check Application" Application, which runs a series of checks against Skylar Compliance (to ensure successful authentication and capacity) and Skylar One (to ensure proper connectivity, permissions, and API access). Running the application generates a detailed report that outlines the system's health, checks authentication compatibility with both Skylar Compliance and Skylar One, and highlights any necessary actions to take before proceeding. Added the "Device Provisioning Report" step to the "Skylar Compliance: Onboard Device" application. This step compiles information from previous steps and generates a "Device Provisioning" report. Added the "Enrich Devices with Credentials data " step to the "Skylar Compliance: Onboard Device" application. This step fetches and validates credential data from Skylar One using the globally unique identifiers (GUIDs) of the associated credential. Devices with missing or invalid credentials are flagged for review, then the enriched data is passed to the next step in the Skylar Compliance onboarding workflow. Added the "Get Device Details" step to the "Skylar Compliance: Onboard Device" application. This step gathers relevant information for each device, such as device property details, linked credentials, device class information, and device collector group information. Added the "Get collector group from Skylar One" step to the "Skylar Compliance: Onboard Device" application. This step fetches Data Collector information responsible for mapping agents in Skylar Compliance. Report data will now be generated when creating devices, both when a device failed to be created and when a device is successfully created. Updated the logic used when finding the Skylar Compliance domain and mapping it to a new device. Improved security when transferring data from one application step to another, such as transferring credential information. Added the "Skylar Compliance: Create or Update Custom Links" application, to allow for the creation and update of custom links for devices in Skylar Compliance. This application replaces functionality that was previously handled by the "Skylar Compliance: Sync Devices" application. NOTE: In order to successfully use the "Skylar Compliance: Create or Update Custom Links" application, you must set the "create_custom_link" configuration option value to zero in the "Skylar Compliance: Sync Devices" application before running the new application. Issues Addressed The following issues were addressed in this release: Addressed an issue with the "Skylar Compliance: Onboard Device" application that caused an error to be generated due to the default assignment of values from the SyncPack. (Cases: 00523695, 00527168) Addressed an issue that prevented Skylar Automation from successfully accessing the Skylar Compliance API. As a part of the fix for this issue, Skylar Automation will now check the HTTP response code during the "GetSkylarComplianceLicenseDetails" step, and will raise a "StepFailedException" error if a "401 - Unauthorized error" message is received. (Case: 00500459) Thank you, Release ManagementAP2 Release Nougat
We're happy to announce that AP2 Nougat release (8.29.41) is now available! New features and enhancements that are included in Skylar One AP2 Nougat version 8.29.41: Updates to the Service Investigator page Enhanced Topology Settings Introduction to Geographic Maps for Business Services Additional new features and enhancement in the following areas: Global Manager GraphQL (GQL ) Skylar AI User Interface Please see the associated Release Notes for more information on these and other changes found in this release. You can download Nougat and associated release notes following this link: https://support.sciencelogic.com/s/release-file/aBtVL0000001I4X0AU/nougatSL1 Ibiza 12.3.11 Release Notification
We are pleased to announce that SL1 Ibiza 12.3.11 is now available. SL1 Ibiza 12.3.11 includes new features and enhancements in the following product areas: Platform and Security Skylar AI SL1 Ibiza 12.3.11 addresses issues in the following product areas: Authentication Data Collection and Retention Discovery l Event Management High Availability and Disaster Recovery Platform and Security Schedule Management Skylar AI The following are the validated upgrade paths: 12.3.10 > 12.3.11 12.3.7 > 12.3.11 12.3.0 > 12.3.11 12.2.7 > 12.3.11 12.1.2 (OL8) > 12.3.11 WARNING: If you are upgrading from a version prior to 12.2.3, then after upgrading SL1, you must also upgrade MariaDB 10.4.x to version 10.6.18. Failure to perform this MariaDB upgrade can cause major functionality issues in SL1. WARNING: There are known issues impacting upgrades to 12.3.11 from the 12.3.3 through 12.3.6 releases that result in upgrade failure. If this occurs, follow the steps in the section Post-Import Scripts in the Getting Started Guide to complete the upgrade. The release and documentation can be accessed using the following links: Ibiza 12.3.11 ISO Ibiza 12.3.11 Patch AMI image self service portal VHD image self service portal For full details, see the SL1 Ibiza 12.3.7 Documentation: 12.3.11 Release Notes 12.3.11 Product Changes 12.3.7 Getting Started GuideSkylar Compliance Automation PowerPack v105
Hello, We are pleased to announce the release of Skylar Compliance Automation PowerPack v105. The following issues were addressed in this release: With this release, ScienceLogic has rebranded the "Restorepoint Automation" PowerPack to the "Skylar Compliance Automation" PowerPack. This change, as well as similar branding changes to the other products offered by ScienceLogic, reflects ScienceLogic's commitment to delivering intelligence that accelerates outcomes through service-centric observability, AI-driven operations, and intelligent automation. For more information, see the ScienceLogic website (https://sciencelogic.com/platform/overview). Resolved an indentation error that caused the "Restorepoint: Generic Action type" snippet to fail when executing the "Start Restorepoint Backup" Run Book automation policy. (Case: 00534255) Thank you, Release ManagementServiceNow Incidents SyncPack v4.2.1 is Released
Hello, We are pleased to announce the release of ServiceNow Incidents SyncPack v4.2.1. Version 4.2.1 of the ServiceNow Incidents SyncPack updates the "Lock" feature to use a Redis lock instead of a Couchbase lock, which allows the SyncPack to function correctly when using DynamoDB or Couchbase as a database. You can download this update from the Support Center page. NOTE: This SyncPack uses the "ServiceNow Base Pack" PowerPack. Thank you, Release ManagementCisco: UCS Manager v106 PowerPack Release Notification
We are pleased to announce that the Cisco: UCS Manager v106 PowerPack has been released. The download for this release can be found on the Support Portal under the PowerPack filename: https://support.sciencelogic.com/s/release-version/aBu0z000000XZSmCAO/cisco-ucs Enhancements and Issues Addressed The following enhancements and addressed issues are included in this release: Updated the PowerPack for Python 3.11 compatibility. Improved the security of the PowerPack by implementing secure XML parsing that disables external entity resolutions, thereby preventing XML External Entity (XXE) vulnerabilites. Addressed an issue that occurred when upgrading to version 105 of the "Cisco: UCS Manager" PowerPack which caused collection errors for multiple Dynamic Applications. The issues were resolved by replacing the libsxlt library with a lxml Python library for the "Cisco: UCS Service Profile Discovery" Dynamic Application and by implementing minor updates to syntax strings for the remaining affected Dynamic Applications. (Case: 00523074 Please refer to the Cisco: UCS Manager v106 PowerPack File Details in the PowerPacks section of the Support Portal for all information pertaining to the Cisco: UCS Manager v106 PowerPack Support Status, Minimum SL1 Version, Solution Information, and Pricing Information. The Cisco: UCS Manager v106 PowerPack Release File Details also contains links to the Release Notes, Manual, and PowerPack Info Report. Issues Addressed in the Cisco: UCS Manager v106 PowerPack Release can be found in the Release Notes.Net-SNMP Base Pack v104 PowerPack Release Notification
We are pleased to announce that the Net-SNMP Base Pack v104 PowerPack has been released. The download for this release can be found on the Support Portal under the PowerPack filename: https://support.sciencelogic.com/s/release-version/aBu0z000000XZUYCA4/netsnmp-base-pack Enhancements and Issues Addressed The following changes are included in this release: Resolved an issue where the “Net-SNMP CPU” and “Net-SNMP Physical Memory” Dynamic Applications would return PHP errors in logs by updating both Dynamic Applications to meet PHP 8 compatibility standards. Please refer to the Net-SNMP Base Pack v104 PowerPack File Details in the PowerPacks section of the Support Portal for all information pertaining to the Net-SNMP Base Pack v104 PowerPack Support Status, Minimum SL1 Version, Solution Information, and Pricing Information. The Net-SNMP Base Pack v104 PowerPack Release File Details also contains links to the Release Notes, Manual, and PowerPack Info Report. Issues Addressed in the Net-SNMP Base Pack v104 PowerPack Release can be found in the Release Notes.
About Product Release Notifications
This user group is for Product Release Notifications
Open Group